ITCA (Ireland)
Technical Tips.
Alternative outhaul cleating arrangement
This alternative cleating arrangement for the outhaul makes adjustment much easier while sailing. I first saw the arrangement at the British Nationals, North Berwick in 2000. The principal measurer agreed that the arrangement did not violate any of the Topper measurement rules, provided the original cleat holes in the boom are used. The additional block must be tied to the end of the boom as the measurement rules do not allow it to be attached permanently.
Equipment needed
Jam cleat with nuts and bolts.
Stainless steel plate. This plate has 4 holes. Two to hold the jam cleat and two for fixing to the boom. (Available from McCready Sailboats)
Small block.(see second illustration)
Upper Boom - original cleat.
Lower Boom - alternative arrangement
A maximum purchase of 4:1 is permitted. The most common arrangements are shown below
Method 1. Inboard end of boom 2:1 purchase.
Method 1. Outboard end of boom 2:1 purchase.
Method 2. Inboard end of boom. 4:1 purchase
Method 2. Outboard end of boom. 1:1 purchase.
