| Maximum
Beam Width |
1m
380mm |
| Lower
Beam Width (inside dinghy) |
1m
140mm |
| Transom
Width (top Corner to Corner) |
1m
010mm |
| Length
Overall |
3m
330mm |
| Transom
Height – bottom edge of transom ply to top middle |
395mm |
| Transom
Height – bottom edge to straight edge top corner to corner |
430mm |
| Lower
Transom Width |
820mm |
| Sides
height all along the dinghy approx |
400mm |
| Lowest
point of Transom Keel to Stem lower keel. |
3m
050mm |
| Side
lower edge of dinghy to keel of dinghy, Measured as a drop |
62.5mm |
| Stem
to centre of maximum Beam Width position |
1m
900mm |
| Transom
to centre of maximum Beam Width position |
1m
460mm |
| Transom
to Centre of main mast hole |
2m
300mm |
| Stem
to centre of main mast hole |
1m
070mm |
| Straight
line stem to each mast rigging eye |
1m
530mm |
| Beam
across main mast hole |
1m
090mm |
| Stem
straight to transom corners at decklevel |
3m
370mm |
| Stem
to transom corner – following upper gunwhale outside edge |
3m
530mm |
| Stem
lower gunwhale stringer to transom lower corner |
3m
200mm |
| Drawing
straight line from stem top edge to centre of transom top edge , the
position of maximum beam width is 135mm lower. |
|
