Crayfish

Canadian Ruth Farago wrote: "...I quickly built a cardboard model and drew up the boat full size. From then it was only a week until the dinghy was ready for sea trials. I found the instructions quite sufficient and had no problems in building it. I chose to build the rowing only version as we already have a Laser. The paint on the dinghy was barely dry when we were off on our 2 week cruise. The children enjoyed rowing round in nearby bays, after we had tied up or anchored. We never had to worry because the dinghy is very stable. We are really happy with this little tender."

To order full building plans please go to the

order form

home

Contact
Richard Woods
Foss Quay, Millbrook, Torpoint, Cornwall, PL10 1EN, UK
Tel and FAX
(0)1752 823301
E-Mail Richard Woods

Crayfish Stitch and Glue Plywood Yacht Tender

THE FACTS AND FIGURES

sheet ply

LOA 2.4m
BOA 1.2m
Weight 20Kgs
Carrying Capacity 3 Adults

CRAYFISH is a 8' long pram bowed yacht tender, built from 2 1/2 sheets of 4mm ply. It is a good introduction to the art of boatbuilding and also a very useful little boat! It can carry three adults and can be fitted with a small sail or outboard. Weight is about 40lbs so its easy to car top or carry on board. We know from personal experience over the last 20 years that its also a lot more durable than an inflatable. It makes an ideal introductory project before starting a larger boat and is really useful once the big boat is finished!